Flexible cable is different from ordinary fixed installation cable, in the installation, please refer to the following installation and attention:
1. Towline cable laying is not distorted, that is, not to solve the cable from the cable drum and the cable reel at one end of the, but should first rotating drum or cable tray cable expansion, when necessary can be cable mounted or suspended. Cable for the occasion can only be obtained directly from the cable reel
2 must pay attention to the minimum bending radius of the cable. (information is available in the form of a selection).
3. The cable must be loose laying side by side in drag chain, as far as possible arranged separately, with the separation of spacer separated or penetrated into the bracket neutral hole in drag chain cable between the gap should at least 10% of the diameter of the cable
4 towline of the cable must not touch each other or stuck together.
Two 5 cables must be fixed, or at least in the end must be fixed chain motion. Mobile general cable towline from the end of the distance should be 20-30 times of the cable diameter.
6 please make sure that the cable is completely moved within the bending radius, that is not to be forced to move. This cable with each other or with the guiding device by relative movement. After a period of operation, it is best to check the position of the cable. The check must be carried out after push and pull.
7 if the cable drag chain broken, also need to be replaced, because of damage caused by excessive tension can not be avoided.
Superiority of flexible cable
Meet the requirements of the same electrical requirements, flexible cable than other similar cable diameter, light weight. Flexible cable bending performance is very good, the minimum bending radius can reach 5 times the cable diameter